manualshive.com logo in svg

Asus P5E-VM - Motherboard - Micro ATX, User Manual, Page: 101 / 156

Share
Download
Asus P5E-VM - Motherboard - Micro ATX User Manual Download Page 101

ASUS P5E-VM HDMI

4-35

   Select Screen

    Select Item 

Enter Go to Sub Screen

F1    General Help

F10   Save and Exit

ESC   Exit

v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.

O.C. PROFILE Configuration

O.C. Profile 1 Status  :Not Installed

O.C. Profile 2 Status  :Not Installed

Save to Profile 1

 

Load from Profile 1

 

Save to Profile 2

 

Load from Profile 2

 

Start O.C. Profile

Save to Profile 1

4.7.2 

ASUS O.C. Profile

This item allows you to store or load multiple BIOS settings. 

Save to Profle 1/2

Allows you to save the current BIOS file to the BIOS Flash. Press <Enter> to save 

the file.

Load from Profile 1/2

Allows you to load the previous BIOS settings saved in the BIOS Flash. Press 

<Enter> to load the file.

Start O.C. Profile

Allows you to run the utility to save and load CMOS. Press <Enter> to run the 

utility.

ASUSTek O.C. Profile Utility V1.06

Current CMOS

Restore CMOS

A:

C:

Note

  [Enter] Select or Load       [B] Backup   [ESC] Exit

  [Tab] Switch                 [Up/Down/Home/End] Move

PATH: 

C:\

 

 

BOARD: 

P5E-VM HDMI

VER: 

0113

DATE: 

10/05/07

BOARD: 

Unknown

VER: 

Unknown

DATE: 

Unknown

•  This function can support devices such as USB flash disk or floppy 

disk with FAT 32/16 format and single partition only.

•  DO NOT shut down or reset the system while updating the BIOS to 

prevent the system boot failure!

BIOS SETUP UTILITY

                                     

Tools

Summary of Contents for P5E-VM - Motherboard - Micro ATX





























































































































































Reviews:

No comments