manualshive.com logo in svg

Asus P5E-VM - Motherboard - Micro ATX, User Manual, Page: 17 / 156

Share
Download
Asus P5E-VM - Motherboard - Micro ATX User Manual Download Page 17

ASUS P5E-VM HDMI

1-1

1.1 

Welcome!

Thank you for buying an ASUS

®

 P5E-VM HDMI motherboard!

The motherboard delivers a host of new features and latest technologies, making it 

another standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the 

items in your package with the list below. 

If any of the above items is damaged or missing, contact your retailer.

1.2 

Package contents

Check your motherboard package for the following items.

Motherboard 

ASUS P5E-VM HDMI

Cables 

3 x Serial ATA signal cables 

 

3 x Serial ATA power cables 

 

1 x Ultra DMA 133/100/66 cable 

 

1 x Floppy disk drive cable 

 

1 x HDMI-to-DVI conversion adaptor

Accessories 

I/O shield 

 

1 x ASUS Q-Connector Kit (USB, 1394, system  

 

panel; Retail version only)

Application CD 

ASUS motherboard support CD 

 

ASUS Superb Software Library CD

Documentation 

User guide

Summary of Contents for P5E-VM - Motherboard - Micro ATX





























































































































































Reviews:

No comments