Doc. No:
ASUSTeK COMPUTER INC.
P505 SERVICE GUIDE
Date: DEC.02, 2004
Rev.: Page:
24
Steps 17:1.Take EARPHONE RUBBER in PHONE JACK first
2.Take one PLATE CURSORKEY, there are the
directions of 2 localization holes forward,
set at CURSORKEY, and then gently
extrapolate, until the fact that PLATE
CURSORKEY sink to the trough.
3.PLATE CURSORKEY pushes inside; make its
smooth in C-PART_ASSY.
4.BUTTON SIDEKEY puts into C-PART_ASSY In
BUTTON trough of.
5.Put into BUTTON RIGHT C-PART_ASSY in the
trough, notices directionality, BUTTON
RIGHT orientates holes and opens one's
mouth greatly down, the opening is small
up.
