Doc. No:
ASUSTeK COMPUTER INC.
P505 SERVICE GUIDE
Date: DEC.02, 2004
Rev.: Page:
15
Steps 7:1.Load CONNECTOR of BATT-NI-MH VARTA onto; tear
the sticks to the paper and sticks to PHONE
JACK right handling.
Notice: The end of a thread of CABLE is towards IR, put CABLE
in order and wind from CONNECTOR of RECEIVER.
Notice: Don't insert to CONNECTOR of RECEIVER.
2.Confirm whether BATT CONNECTOR is really
inserted.
Steps 8:1.CURSORKEY and 6PINFPC combine
2.MAIN_BD CONNECTOR black gear of CONNECTOR of
6PINFPC turns on.
3.Notice: Present about 90 degrees, in order to
assemble.
4.Make 2 wings of 6PINFPC close to CONNECTOR.
Notice: Close to 2 wings of FPC CONNECTOR.
