Asus P4S800-X Page 61 User Manual Download

Page: 61 / 64

ASUS P4S800-X motherboard

3-3

3.2.2 Drivers menu

The drivers menu shows the available device drivers if the system detects installed
devices. Install the necessary drivers to activate the devices.

SiS Mini IDE Driver

Installs the SiS

Mini IDE driver.

SiS AGP Driver

Installs the SiS

Accelerated Graphics Port (AGP) driver.

SoundMAX Audio Driver and Application

Installs the SoundMAX™ Audio driver and software applications.

SiS PCI LAN Driver

Installs the SiS

Fast Ethernet network driver.

USB 2.0 Driver

Installs the USB 2.0 driver.

3.2.3 Utilities menu

The Utilities menu shows the applications and other software that the motherboard
supports.

•

The USB 2.0 driver is only supported in Windows

2000.

•

Windows

XP users must install USB 2.0 driver with Windows

XP SP1

•

This motherboard does not support USB 2.0 drivers under Windows

98SE

or Windows

ME. However, a utility is provided in support CD to remove “!”

(device conflict symbol) in Device Manager list.

ASUS PC Probe

This smart utility monitors the fan speed, CPU temperature, and system voltages,
and alerts you on any detected problems. This utility helps you keep your computer
at a healthy operating condition.

Summary of Contents for P4S800-X

































































Search results

Summary of Contents for P4S800-X

Reviews:

Related manuals for P4S800-X

Brands by name

Popular brands

Asus P4S800-X, User Manual

Search results

Summary of Contents for P4S800-X

Reviews:

Related manuals for P4S800-X

Brands by name

Popular brands