manualshive.com logo in svg

Asus P2B-D2, User Manual

Share
Download
Asus P2B-D2 User Manual Download Page 83

ASUS P2B-D2 User’s Manual

83

WINDOWS NT 4.0

WINDOWS NT

C. VGA Driver

C. Install S3 V775 VGA Driver

1. Start the system with Windows NT 4.0 installed.

IMPORTANT: Select Windows NT Workstation Version 4.00 [VGA mode],
when the message, “Please select the operating system...”, appears.

2. From "Start", point to Settings, and then click on the Control Panel icon.

3. In Control Panel, double-click the Display icon and click the Settings tab.

4. Click Display Type. The Display Type window appears.

5. Click Change. The Change Display window appears.

6. Click Have Disk.

7. Insert the ASUS Support CD into your CD-ROM drive, type 

E

:\

VGA

\

NT

40

 in the

entry box, and click OK.

8. From the list of displayed devices, select ASUS PCI-V775V2 V1.04. and then

click OK. The Third Party Drivers window appears.

9. Click Yes to proceed.

Summary of Contents for P2B-D2

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands