manualshive.com logo in svg

Asus P2B-D2, User Manual

Share
Download
Asus P2B-D2 User Manual Download Page 102

ASUS P2B-D2 User’s Manual

102

Selecting Small or Large Fonts for Windows

The default font sizes for Windows sessions are listed below.

Resolution

Default Font Size

640x480

Small

800x600

Small

1024x768

Large

1280x1024

Large

1600x1200

Large

NOTE: Large fonts are not available for 640x480 resolution.

Use the following procedures to select small or large fonts for Windows sessions.

1. Select the "S3 Windows Font Size" object in the OS/2 System Setup Folder.

2. Click the radio button next to the font size you wish to select.

3. Click the OK button.

4. A message will display saying that the new settings will take effect the next time

you restart your Windows session. Currently open sessions will not be affected
by the new settings.

5. Click the OK button.

6. Start any WIN-OS/2 window or full-screen session.

The setting you select will remain in effect until you explicitly change it, you change
your display resolution, or you install a new display driver.

IBM OS/2

IBM OS/2

A. VGA Driver

Summary of Contents for P2B-D2

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands