manualshive.com logo in svg

Asus P2B-D2, User Manual

Share
Download
Asus P2B-D2 User Manual Download Page 56

ASUS P2B-D2 User’s Manual

56

IV.  BIOS SOFTWARE

Load Defaults

IV.  BIOS

Load BIOS Defaults

The “Load BIOS Defaults” option allows you to load the troubleshooting de-
fault values permanently stored in the BIOS ROM.  These default settings
are non-optimal and disable all high performance features.  To load these
default settings, highlight “Load BIOS Defaults” on the main screen and then
press <Enter>.  The system displays a confirmation message on the screen.
Press <Y> and then <Enter> to confirm.  Press <N> and then <Enter> to
abort. This feature does not affect the fields on the Standard CMOS Setup screen.

Load Setup Defaults

The “Load Setup Defaults” option allows you to load the default values to the
system configuration fields. These default values are the optimized configuration
settings for the system. To load these default values, highlight “Load Setup De-
faults” on the main screen and then press <Enter>.  The system displays a confirma-
tion message on the screen.  Press <Y> and then <Enter> to confirm. Press <N> and
then <Enter> to abort.  This feature does not affect the fields on the Standard CMOS
Setup screen.

Summary of Contents for P2B-D2

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands