manualshive.com logo in svg

Asus P2B-D2, User Manual

Share
Download
Asus P2B-D2 User Manual Download Page 68

ASUS P2B-D2 User’s Manual

68

WINDOWS 98

WINDOWS 98

C. AIC-7890 

Driver

C. Install Adaptec AIC-7890 Driver

1. Start the system with Windows 98 installed.

2. From "Start", point to Settings, and then click on the Control Panel icon.

3. In Control Panel, double-click the System icon.

4. Select Device Manager, double-click SCSI controllers, and then double-click

Adaptec AHA-2940U2/AHA-2940U2W PCI SCSI Controller.

5. Select the driver, and then click Update Driver.

6. Click Next.

7. Select  Search for a better driver than the one your device is using now.

(Recommended), and then click Next.

8. Select Specify a Location, and insert the ASUS P2B-D2 CD. Browse or type

the path to E:\SCSI\WIN98 (Where E is your CD-ROM drive), and then click
Next.

9. If the step is correct, you will see the message "location of driver: ASUS

D:\SCSI\WIN95\AIC78XX.INF". Click Next.

10. If you see the Version Conflict window, click Yes to keep the files.

11. Click Finish.

12. Click Yes to restart your computer.

Summary of Contents for P2B-D2

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands