Get started!
1-9
Setting up GPS
To receive GPS signal
Flip open the GPS antenna panel from the back of the device. You may
rotate the panel as illustrated below.
To use the GPS car-mount kit
1.
Mount the GPS cradle onto the car’s
windshield, then place the device on the
cradle.
2.
Connect the car power cord to the power
jack at the lower left side of the mount
cradle.
3.
Plug the other end of the car power cord to
the cigarette lighter socket.
SD
SD
NOTE
If the GPS signal reception is weak, purchase and use an
external antenna. Flip open the antenna cover that is above
the panel, then plug in the external antenna to the antenna
port.
NOTE
The GPS cradle can be freely
rotated.
Summary of Contents for MyPal A632
