Asus Maximus VIII Hero User Manual Download Page 48

Page: 48 / 194

1-32

Chapter 1: Product Introduction

Chapter 1

1.2.9

Internal connectors

Intel

Z170 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATAEXPRESS12)

These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s

signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10

configuration with the Intel

Rapid Storage Technology through the onboard Intel

Z97

chipset.

•

These connectors are set to [

AHCI Mode

] by default. If you intend to create a Serial

ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [

RAID

Mode

]. Refer to section

SATA Configuration

for details.

•

Before creating a RAID set, refer to section

RAID configurations

or the manual

bundled in the motherboard support DVD.

•

When using NCQ, set the SATA Mode in the BIOS to [

AHCI Mode

]. Refer to section

SATA Configuration

for details.

Summary of Contents for Maximus VIII Hero



































































































































































































Search results

Summary of Contents for Maximus VIII Hero

Reviews:

Asus Maximus VIII Hero, User Manual, Page: 48 / 194

Search results

Summary of Contents for Maximus VIII Hero

Reviews: