Asus Maximus VIII Hero, User Manual, Page: 120 / 194

3-44
Chapter 3: BIOS Setup
Chapter 3
PS2 Devices Support [Enabled]
Allows you to enable or disable control of the PS2 devices’ availability during POST.
Configuration options: [Enabled] [Disabled]
Network Stack Driver Support [Disabled]
[Disabled] Select to skip the network stack driver from loading during POST.
[Enabled] Select to load the network stack driver during POST.
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot]
Accelerates the boot speed on the next boot after an AC power loss.
Boot Logo Display [Auto]
[Auto] Auto adjustments for Windows requirements.
[Full Screen] Maximize the boot logo size.
[Disabled] Hid the logo during POST.
The following items appears only when you set the Boot Logo Display item to [Disabled] .
Post Report [5 sec]
This item This item allows you to select a desired waiting time of the POST report from
0 to 10 seconds or until <ESC> is pressed.
The following items appears only when you set the Boot Logo Display item to [Full Screen]
or [Auto] .
Post Delay Time [3 sec]
This item This item allows you to select a desired additional POST waiting time to
easily enter the BIOS Setup. You can only execute the POST delay time during normal
boot. The values range from 0 to 10 seconds.
This feature only works when set under normal boot.
Boot up NumLock State [Enabled]
[Enabled] Set the power-on state of the NumLock to [On] .
[Disabled] Set the power-on state of the NumLock to
[Off]
.
USB Support [Partial Initial]
[Disabled] All USB devices will not be available until OS boot up for a
fastest POST time.
[Full Initial] All USB devices will be available during POST. This process will
extend the POST time.
[Partial Initial] For a faster POST time, only USB ports with keyboard and
mouse connections will be detected.