Asus Maximus IV Extreme User Manual Download Page 63

Page: 63 / 186

2. Intel

P67 Serial ATA 3.0 Gb/s connectors

(7-pin SATA3G_3–6 [gray])

These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical

disc drives via Serial ATA 3.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5,

and 10 configuration with the Intel

Rapid Storage Technology through the

onboard Intel

P67 chipset.

• These connectors are set to [IDE Mode] by default. If you intend to create a

Serial ATA RAID set using these connectors, set the SATA Mode item in the

BIOS to [RAID Mode]. Refer to section 3.5.4 SATA Configuration for details.

• Before creating a RAID set, refer to section 4.4 RAID configurations or

the manual bundled in the motherboard support DVD.

• When using hot-plug and NCQ, set the SATA Mode in the BIOS to [AHCI

Mode]. Refer to section �.�.4 SATA Configuration for details.

• You must install Windows

XP Service Pack 3 or later versions before using

Serial ATA hard disk drives. The Serial ATA RAID feature is available only if

you are using Windows

XP SP2 or later versions.

ASUS Maximus IV Extreme

2-31

Summary of Contents for Maximus IV Extreme



























































































































































































Search results

Summary of Contents for Maximus IV Extreme

Reviews:

Asus Maximus IV Extreme, User Manual, Page: 63 / 186

Search results

Summary of Contents for Maximus IV Extreme

Reviews: