Asus MAXIMUS III FORMULA User Manual Download Page 61

Page: 61 / 172

5. ROG connector (3-pin ROG)

This connector is for the box (labeled as Republic of Gamers) on the

heatpipe assembly. Connect the cable of the box and it lights when the

system is on.

4. USB connectors (10-1 pin USB910; USB1112; USB13)

These connectors are for USB 2.0 ports. Connect the USB module cable

to any of these connectors, then install the module to a slot opening at the

back of the system chassis. These USB connectors comply with USB 2.0

specification that supports up to 48� Mbps connection speed.

Never connect a 1394 cable to the USB connectors. Doing so will damage the

motherboard!

You can connect the USB cable to ASUS �-Connector (USB, blue) first, and

then install the Q-Connector (USB) to the USB connector onboard.

ROG Maximus III Formula

2-33

Summary of Contents for MAXIMUS III FORMULA













































































































































































Search results

Summary of Contents for MAXIMUS III FORMULA

Reviews:

Related manuals for MAXIMUS III FORMULA

Brands by name

Popular brands

Asus MAXIMUS III FORMULA, User Manual

Search results

Summary of Contents for MAXIMUS III FORMULA

Reviews:

Related manuals for MAXIMUS III FORMULA

Brands by name

Popular brands