Asus MAXIMUS III FORMULA User Manual Download Page 100

Page: 100 / 172

3-26

Chapter 3: BIOS setup

The

USB Devices Enabled

item shows the auto-detected values. If no USB

device is detected, the item shows None.

USB Functions [Enabled]

[Enabled]

Enables the USB Host Controllers.

[Disabled]

Disables the controllers.

The following items appear only when you set

USB Functions

to [Enabled].

Legacy USB Support [Auto]

[Auto]

Allows the system to detect the presence of USB devices at

startup. If detected, the USB controller legacy mode is enabled. If

no USB device is detected, the legacy USB support is disabled.

[Enabled]

Enables the support for USB devices on legacy operating systems

(OS).

[Disabled]

Disables the function.

BIOS EHCI Hand-off [Enabled]

[Enabled]

Enables the support for operating systems without an EHCI

hand-off feature.

[Disabled]

Disables the function.

�.5.4

USB Configuration

The items in this menu allows you to change the USB-related features. Select an

item then press <Enter> to display the configuration options.

BIOS SETUP UTILITY

Advanced

USB Configuration

Module Version - 2.24.3-13.4

USB Devices Enabled:

2 Hubs

USB Functions

[Enabled]

Legacy USB Support

[Auto]

BIOS EHCI Hand-off

[Enabled]

Enable support for

all USB ports.

Summary of Contents for MAXIMUS III FORMULA













































































































































































Search results

Summary of Contents for MAXIMUS III FORMULA

Reviews:

Related manuals for MAXIMUS III FORMULA

Brands by name

Popular brands

Asus MAXIMUS III FORMULA, User Manual

Search results

Summary of Contents for MAXIMUS III FORMULA

Reviews:

Related manuals for MAXIMUS III FORMULA

Brands by name

Popular brands