Asus M4A89GTD PRO User Manual Download Page 88

Page: 88 / 132

3-28

Chapter 3: BIOS setup

Chapter 3

3.6.5

PCIPnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.

Plug And Play O/S [No]

[Yes]

When set to [Yes] and if you install a Plug and Play operating system, the

operating system configures the Plug and Play devices not required for boot.

[No]

When set to [No], BIOS configures all the devices in the system.

Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections

may cause system to malfunction.

Plug And Play O/S

[No]

BIOS SETUP UTILITY

Advanced

The

USB Devices Enabled

item shows the auto-detected values. If no USB device is

detected, the item shows

None

USB Support [Enabled]

[Enabled]

Enables the USB Host Controllers.

[Disabled]

Disables the controllers.

The following items appear only when you set

USB Support

to [Enabled].

Legacy USB Support [Auto]

[Auto]

Allows the system to detect the presence of USB devices at startup. If

detected, the USB controller legacy mode is enabled. If no USB device is

detected, the legacy USB support is disabled.

[Enabled]

Enables the support for USB devices on legacy operating systems (OS).

[Disabled]

Disables the function.

USB 2.0 Controller Mode [HiSpeed]

[FullSpeed]

Sets the USB 2.0 controller mode to FullSpeed (12 Mbps).

[HiSpeed]

Sets the USB 2.0 controller mode to HiSpeed (480 Mbps).

BIOS EHCI Hand-off [Enabled]

[Enabled]

Enables the support for operating systems without an EHCI hand-off feature.

[Disabled]

Disables the function.

Summary of Contents for M4A89GTD PRO





































































































































Search results

Summary of Contents for M4A89GTD PRO

Reviews:

Related manuals for M4A89GTD PRO

Brands by name

Popular brands

Asus M4A89GTD PRO, User Manual

Search results

Summary of Contents for M4A89GTD PRO

Reviews:

Related manuals for M4A89GTD PRO

Brands by name

Popular brands