Asus M4A89GTD PRO User Manual Download Page 126

Page: 126 / 132

5-4

Chapter 5: ATI

CrossFireX™ technology support

Chapter 5

5.2

ATI

Hybrid CrossFireX™ technology

The motherboard supports the ATI

Hybrid CrossFireX™ technology that allows you to install

multi-graphics processing units (GPU) CrossFireX cards.

5.2.1

System requirements

Before using ATI Hybrid CrossFireX, ensure that your system meets the following basic

requirements:

•

Operating System: Windows

Vista

•

Memory capacity: Minimum 1GB

•

CPU: AM3

•

On-board graphics card RAM: 256MB

Visit the AMD ATI website for the latest graphics card support list.

5.2.2

Before you proceed

Configure the BIOS settings for the graphics card to support ATI Hybrid CrossFireX.
To set Internal Graphics:

1. Press <Del> during the Power-On-Self-Test (POST) to enter the BIOS Setup utility.
2. Go to the

Ai Tweaker

menu and set

UMA Frame Buffer Size

to [256M] or above

3. Select

Advanced

> Chipset > 890GX Configuration > Internal Graphics

Configuration

, set

Surround View

to [Enabled].

4. Press <F10> to save the changes and exit BIOS settings. Select

to confirm.

5.2.3

Installing AMD Chipset Driver

To install the driver that supports Hybrid CrossFireX technology:

1. Insert the Support DVD that comes with your motherboard into the optical drive. The

DVD automatically displays the Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run

the DVD.

2. From the Drivers menu, click

AMD Chipset Driver

to install it. Follow the onscreen

instructions to finish the installation.

Restart your computer after the installation is completed.

When the system restarts, wait for a few seconds for the driver to load automatically.

Summary of Contents for M4A89GTD PRO





































































































































Search results

Summary of Contents for M4A89GTD PRO

Reviews:

Related manuals for M4A89GTD PRO

Brands by name

Popular brands

Asus M4A89GTD PRO, User Manual

Search results

Summary of Contents for M4A89GTD PRO

Reviews:

Related manuals for M4A89GTD PRO

Brands by name

Popular brands