Asus M3A32-MVP DELUXE WIFI-AP User Manual Download Page 51

Page: 51 / 176

ASUS M3A32-MVP Deluxe Series

2-25

2.7

Connectors

2.7.1

Rear panel connectors

1. PS/2 keyboard port (purple).

This port is for a PS/2 keyboard.

2. Coaxial S/PDIF Out port.

This port connects an external audio output device

via a coaxial S/PDIF cable.

3. IEEE 1394a port.

This 6-pin IEEE 1394a port provides high-speed

connectivity for audio/video devices, storage peripherals, PCs, or portable

devices.

4. LAN (RJ-45) port.

Supported by Marvell

88E1116 Gigabit LAN controller,

this port allows Gigabit connection to a Local Area Network (LAN) through a

network hub. Refer to the table below for the LAN port LED indications.

7 8

LAN port LED indications

5. Center/Subwoofer port (orange).

This port connects the center/subwoofer

speakers.

6. Rear Speaker Out port (black).

This port connects the rear speakers in a

4-channel, 6-channel, or 8-channel audio configuration.

7. Line In port (light blue).

This port connects the tape, CD, DVD player, or

other audio sources.

8. Line Out port (lime).

This port connects a headphone or a speaker. In

4-channel, 6-channel, and 8-channel configuration, the function of this port

becomes Front Speaker Out.

9. Microphone port (pink).

This port connects a microphone.

10. Side Speaker Out port (gray).

This port connects the side speakers in an

8-channel audio configuration.

SPEED

LED

ACT/LINK

LED

LAN port

Activity/Link LED

Speed LED

Status

Description

Status

Description

OFF

No link

OFF

10 Mbps connection

ORANGE

Linked

ORANGE

100 Mbps connection

BLINKING

Data activity

GREEN

1 Gbps connection

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

















































































































































































Search results

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

Reviews:

Related manuals for M3A32-MVP DELUXE WIFI-AP

Brands by name

Popular brands

Asus M3A32-MVP DELUXE WIFI-AP, User Manual

Search results

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

Reviews:

Related manuals for M3A32-MVP DELUXE WIFI-AP

Brands by name

Popular brands