Asus M3A32-MVP DELUXE WIFI-AP User Manual Download Page 125

Page: 125 / 176

ASUS M3A32-MVP Deluxe Series

5-13

5.3.3

AI Audio 2 (SoundMAX

High Definition Audio utility)

The ADI AD1988 High Definition Audio CODEC provides 8-channel audio

capability through the SoundMAX

audio utility with AudioESP™ software to

deliver the ultimate audio experience on your PC. The software implements high

quality audio synthesis/rendering, 3D sound positioning, and advanced voice-input

technologies.
Follow the installation wizard to install the ADI AD1988 Audio Driver from the

support DVD that comes with the motherboard package to activate the

SoundMAX

audio utility.

If the SoundMAX

audio utility is correctly installed, you

will find the SoundMAX

/ SoundMAX

BlackHawk icon

on the taskbar.

You must use 4-channel, 6-channel or 8-channel speakers for this setup.

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

















































































































































































Search results

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

Reviews:

Related manuals for M3A32-MVP DELUXE WIFI-AP

Brands by name

Popular brands

Asus M3A32-MVP DELUXE WIFI-AP, User Manual

Search results

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

Reviews:

Related manuals for M3A32-MVP DELUXE WIFI-AP

Brands by name

Popular brands