Asus M3A32-MVP DELUXE WIFI-AP User Manual Download Page 44

Page: 44 / 176

2-18

Chapter 2: Hardware information

2.4.5

Installing ASUS Cool Mempipe

Install ASUS Cool Mempipe to your motherboard to achieve excellent thermal

dissipation for your memory modules.
To install ASUS Cool Mempipe:

3. Loosen the four nuts to part the

heat spreaders.

4. Remove the four pieces of

protective film on the heat

spreaders.

1. Secure the motherboard to your

chassis with nine screws.

2. Install memory modules to

sockets DIMM_A1/B1 first.

5. Align the Cool Mempipe with the

northbridge heatsink and ensure

the memory modules are located

between the heat spreaders.

6. Fasten the Cool Mempipe to the

northbridge heatsink with four

screws.

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

















































































































































































Search results

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

Reviews:

Related manuals for M3A32-MVP DELUXE WIFI-AP

Brands by name

Popular brands

Asus M3A32-MVP DELUXE WIFI-AP, User Manual

Search results

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

Reviews:

Related manuals for M3A32-MVP DELUXE WIFI-AP

Brands by name

Popular brands