Asus M3A32-MVP DELUXE WIFI-AP User Manual Download Page 35

Page: 35 / 176

ASUS M3A32-MVP Deluxe Series

2-9

2. Attach one end of the retention bracket

to the retention module base.

3. Align the other end of the retention

bracket (near the retention bracket

lock) to the retention module base.

A clicking sound denotes that the

retention bracket is in place.

4. Push down the retention bracket lock

on the retention mechanism to secure

the heatsink and fan to the module

base.

Make sure that the fan and

heatsink assembly perfectly fits

the retention mechanism module

base, otherwise you cannot snap

the retention bracket in place.

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

















































































































































































Search results

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

Reviews:

Related manuals for M3A32-MVP DELUXE WIFI-AP

Brands by name

Popular brands

Asus M3A32-MVP DELUXE WIFI-AP, User Manual

Search results

Summary of Contents for M3A32-MVP DELUXE WIFI-AP

Reviews:

Related manuals for M3A32-MVP DELUXE WIFI-AP

Brands by name

Popular brands