manualshive.com logo in svg

Asus M2N-X PLUS, User Manual, Page: 75 / 92

Share
Download
Asus M2N-X PLUS User Manual Download Page 75

ASUS M2N-X

2-

2.5.5  Hardware Monitor

Hardware Monitor

CPU Temperature 

 [38ºC/100ºF]

MB Temperature 

 [32ºC/89.5ºF]

CPU Fan Speed  

 [3260RPM]

Chassis Fan Speed 

 [N/A]

VCORE Voltage 

 [ 1.424V]

3.3V Voltage 

 [ 3.296V]

5V Voltage 

 [ 5.068V]

12V Voltage 

 [12.416V]

Smart Q-FAN Function            [Disabled]

CPU Temperature [xxxºC/xxxºF] [Ignored] 

MB Temperature [xxxºC/xxxºF] [Ignored]

The onboard hardware monitor automatically detects and displays the 

motherboard and CPU temperatures. Select Ignored if you do not wish to 

display the detected temperatures.

CPU Fan Speed (RPM) [xxxxRPM] or [N/A] or [Ignored]

The onboard hardware monitor automatically detects and displays the CPU 

fan speed in rotations per minute (RPM). If the fan is not connected to the 

motherboard, the field shows N/A. Select Ignored if you do not wish to 

display the detected speed.

Chassis Fan Speed [xxxxRPM] or [N/A] or [Ignored]

The onboard hardware monitor automatically detects and displays the chassis 

fan speed in rotations per minute (RPM). If the fan is not connected to the 

chassis, the specific field shows N/A. Select Ignored if you do not wish to 

display the detected speed.

VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage 

[xxxxV] or [Ignored]

The onboard hardware monitor automatically detects the voltage output 

through the onboard voltage regulators.

Smart Q-FAN Function [Disabled]

Allows you to enable or disable the Q-Fan function that monitors the CPU/

System temperature and smartly adjust the fan speed. 

Configuration options: [Disabled] [Enabled] 

Summary of Contents for M2N-X PLUS





























































































Reviews:

No comments