manualshive.com logo in svg

Asus M2N-X PLUS, User Manual, Page: 74 / 92

Share
Download
Asus M2N-X PLUS User Manual Download Page 74

2-2

Chapter 2: BIOS setup

2.5.4  APM Configuration

APM Configuration

  

Restore on AC Power Loss 

 [Power Off]

Power On By PCI Device 

 [Disabled]

Power On By PCIE Device 

 [Disabled]

Power On By LAN(MAC) 

 [Disabled] 

Power On By Ring 

 [Disabled] 

Power On By PS/2 KB/MS 

 [Disabled]

Power On By RTC Alarm 

 [Disabled]

Restore on AC Power Loss [Power Off]

When set to Power Off, the system goes into off state after an AC power 

loss. When set to Power On, the system goes on after an AC power loss.  

Configuration options: [Power Off] [Power On] 

Power On By PCI Device [Disabled]

When set to [Enabled], this parameter allows you to turn on the system 

through a PCI LAN or modem card. This feature requires an ATX power 

supply that provides at least 1A on the +5VSB lead.  

Configuration options: [Disabled] [Enabled]

Power On By PCIE Device [Disabled]

When set to [Enabled], this parameter allows you to turn on the system 

through a PCIE LAN or modem card. This feature requires an ATX power 

supply that provides at least 1A on the +5VSB lead. Configuration options: 

[Disabled] [Enabled] 

Power On By LAN(MAC) [Disabled]

Enable or disable LAN(MAC) to generate a wake event.  

Configuration options: [Disabled] [Enabled]

Power On By Ring [Disabled]

Enable or disable RI to generate a wake event.  

Configuration options: [Disabled] [Enabled]

Power On By PS/2 KB/MS [Disabled]

Enable or disable PS/2 Keyboard/Mouse to generate a wake event. 

Configuration options: [Disabled] [Enabled]

Power On By RTC Alarm [Disabled]

Allows you to enable or disable RTC to generate a wake event. When this 

item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC 

Alarm Minute, and RTC Alarm Second appear with set values.  

Configuration options: [Disabled] [Enabled]

Summary of Contents for M2N-X PLUS





























































































Reviews:

No comments