manualshive.com logo in svg

Asus M2N-X PLUS, User Manual, Page: 73 / 92

Share
Download
Asus M2N-X PLUS User Manual Download Page 73

ASUS M2N-X

2-1

2.5 

Power menu

The Power menu items allow you to change the settings for the Advanced 

Power Management (APM). Select an item then press <Enter> to display 

the configuration options.

2.5.1  Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface 

(ACPI) state to be used for system suspend.  

Configuration options: [S1 (POS) Only] [S3 only] [Auto]

2.5.2  ACPI Version Features [ACPI v1.0]

Allows you to add more tables for Advanced Configuration and Power 

Interface (ACPI) 2.0 specifications. 

 

Configuration options: [ACPI v1.0] [ACPI v2.0] [ACPI v3.0]

2.5.3  ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power 

Interface (ACPI) support in the Application-Specific Integrated Circuit 

(ASIC). When set to Enabled, the ACPI APIC table pointer is included in the 

RSDT pointer list.  

Configuration options: [Disabled] [Enabled]

Suspend Mode 

 [Auto]

ACPI Version Features 

 [ACPI v1.0]

ACPI APIC Support 

 [Enabled]

   

   APM Configuration

 

Hardware Monitor

Summary of Contents for M2N-X PLUS





























































































Reviews:

No comments