manualshive.com logo in svg

Asus M2N-X PLUS, User Manual, Page: 38 / 92

Share
Download
Asus M2N-X PLUS User Manual Download Page 38

1-26

Chapter 1: Product introduction

Never connect a 1394 cable to the USB connectors. Doing so will 

damage the motherboard!

6.  USB connectors (10-1 pin USB56, USB78, USB 910)

These connectors are for USB 2.0 ports. Connect the USB module 

cable to any of these connectors, then install the module to a slot 

opening at the back of the system chassis. These USB connectors 

comply with USB 2.0 specification that supports up to 480 Mbps 

connection speed.

7.  Optical drive audio in connector (4-pin CD)

These connectors allow you to receive stereo audio input from sound 

sources such as a CD-ROM, TV tuner, or MPEG card. 

The USB 2.0 module is purchased separately.

CD

(black)

Right

 A

udio Channel

Left 

Audio Channel

Ground Ground

M2N-X

M2N-X 

I

nternal Audio Connector

M2N-X

M2N-X USB 2.0 Connectors

USB6

USB+V USB_P6-  GND NC

USB+V USB_P- USB_P+

GND

1

USB10

USB+V USB_P10-  GND NC

USB+V USB_P- USB_P+

GND

1

USB

USB+V USB_P- USB_P+ GND NC

USB+V USB_P- USB_P+

GND

1

Summary of Contents for M2N-X PLUS





























































































Reviews:

No comments