Asus M2N-L User Manual Download Page 98

Page: 98 / 108

-2

Chapter : Software support

[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [

↑↓

] Select [ENTER] Popup

RAID Mode:

Striped

Stripe Block:

Optimal

Free Disks

Array Disks

Port

Disk Model

Capacity

Port

Disk Model Capacity

1.0 XXXXXXXXXXXXX

XX.XXGB

[

→

] Add

1.1 XXXXXXXXXXXXX

XX.XXGB

[

←

] Del

MediaShield BIOS Apr 20 2007

- Define a New Array -

All data on new (or added) disks will be overwritten. Continue?

[Y] YES [N] NO

4. Press <F7> to create the RAID set. A pop-up window appears.

5. Press <Y> to overwrite all data on new

(or added) disks, or press <N> to cancel.

When you press <Y>, a confirmation

message appears.

You will lose all data on the drives if you clear the MBR!

7. The utility displays the created RAID set. Press <Ctrl+X> to save your settings

and exit the utility.

[Ctrl-X] Exit [

↑↓

]Select [B] Set Bootable [N]New Array [ENTER] Detail

MediaShield BIOS Apr 20 2007

- Array List -

Boot Status Vendor Array Size

NO Healthy NVIDIA STRIPE XXX.XXG

6. Press <Y> to clear MBR.

The

Array List

windows appears.

Clear MBR?

[Y] YES [N] NO

Summary of Contents for M2N-L













































































































Search results

Summary of Contents for M2N-L

Reviews:

Asus M2N-L, User Manual, Page: 98 / 108

Search results

Summary of Contents for M2N-L

Reviews: