Asus M2N-L User Manual Download Page 73

Page: 73 / 108

ASUS M2N-L

-2

4.4.5

MPS Configuration

The items in this menu allows you to configure the Multi-Processor Table. Select

an item then press <Enter> to display the configuration options.

MPS Revision [1.4]

Allows you to select the multi-processor system revision.

Configuration options: [1.1] [1.4]

4.4.6

USB Configuration

The items in this menu allows you to change the USB-related features. Select an

item then press <Enter> to display the configuration options.

IRQ-xx assigned to [PCI Device]

When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices.

When set to [Reserved], the IRQ is reserved for legacy ISA devices.

Configuration options: [PCI Device] [Reserved]

MPS Configuration

MPS Revision

[1.4]

Select MPS

Revision.

USB Configuration

Module Version - 2.24.0-12.4

USB Devices Enabled: None

None

USB 1.1 Controller

[Enabled]

USB 2.0 Controller

[Enabled]

Legacy USB Support

[Auto]

USB 2.0 Controller Mode

[HiSpeed]

BIOS EHCI Hand-Off

[Enabled]

Options

Enabled

Disabled

The Module Version and USB Devices Enabled items show the

auto-detected values. If no USB device is detected, the USB Devices Enabled

item shows None.

Summary of Contents for M2N-L













































































































Search results

Summary of Contents for M2N-L

Reviews:

Asus M2N-L, User Manual, Page: 73 / 108

Search results

Summary of Contents for M2N-L

Reviews: