Asus M2N-L User Manual Download Page 64

Page: 64 / 108

Chapter : BIOS setup

4.4

Advanced menu

The Advanced menu items allow you to change the settings for the CPU and other

system devices.

Take caution when changing the settings of the Advanced menu items. Incorrect

field values can cause the system to malfunction.

CPU Configuration

Chipset

Onboard Devices Configuration

PCIPnP

MPS Configuration

USB Configuration

Remote Access Configuration

Configure CPU.

4.4.1 CPU Configuration

The items in this menu show the CPU-related information that the BIOS

automatically detects.

CPU Configuration

Module Version: 13.20

AGESA Version: 3.1.4.0

Physical Count: 1

Logical Count : 4

AMD Opteron(tm) Processor 1354

Revision: B2

Cache L1: 512KB

Cache L2: 2045KB

Cache L3: 2MB

Speed : 2200MHz, NB Clk: 1800MHz

Able to Change Freq : Yes

uCode Patch Level : 0x1000035

GART Error Reporting

[Disabled]

Microcode Updation

[Enabled]

Secure Virtual Machine Mode

[Enabled]

Cool ‘N’ Quiet

[Disabled]

ACPI SRAT Table

[Enabled]

This option should

remain disabled for

the normal operation.

The driver developer

may enable it for

testing purpose.

Summary of Contents for M2N-L













































































































Search results

Summary of Contents for M2N-L

Reviews:

Asus M2N-L, User Manual, Page: 64 / 108

Search results

Summary of Contents for M2N-L

Reviews: