Asus M2N-L User Manual Download Page 41

Page: 41 / 108

ASUS

M2N-L

2-2

4. CPU, Front and Rear fan connectors (3-pin CPU_FAN1,

3-pin FRNT_FAN1/2, 3-pin Rear_FAN1)

The fan connectors support cooling fans of 350mA~2000mA (24 W max.) or

a total of 1A~3.48A (41.76 W max.) at +12V. Connect the fan cables to the

fan connectors on the motherboard, making sure that the black wire of each

cable matches the ground pin of the connector.

• Do not forget to connect the fan cables to the fan connectors. Lack

of sufficient air flow inside the system may damage the motherboard

components. These are not jumpers! DO NOT place jumper caps on the

fan connectors!

• All fan features the ASUS Smart Fan technology.

M2N-L

M2N-L Fan Connectors

GND

+12V

TACHO

CPU_FAN1

GN
D

+12V

TACH

FRNT_FAN1

GND

+12V

TACHO

FRNT_FAN2

GND

+12V

TACHO

REAR_FAN1

5. USB connector (10-1 pin USB34)

The connector is for USB 2.0 ports. These connectors comply with the USB

2.0 specification that supports up to 480 Mbps connection speed.

M2N-L

M2N-L USB 2.0 Connector

USB+5V USB_P4

USB_P4

USB34

USB+5V USB_P3

USB_P3

The expansion USB ports module is optional.

Summary of Contents for M2N-L













































































































Search results

Summary of Contents for M2N-L

Reviews:

Asus M2N-L, User Manual, Page: 41 / 108

Search results

Summary of Contents for M2N-L

Reviews: