Asus LSISAS RAID Card PIKE 1064E User Manual Download

Page: 47 / 56

ASUS PIKE 1064E/1068E

3-5

4. Insert the RAID driver disk you created earlier to the floppy disk drive, then

press <Enter>.

Windows Setup

ENTER=Continue ESC=Cancel F3=Exit

Please insert the disk labeled

Manufacturer-supplied hardware support disk

into Drive A:

* Press ENTER when ready.

5. Select

LSI Fusion-MPT SAS Driver (Server 2003 32-bit)

, then press

<Enter>.

Windows Setup

ENTER=Select F3=Exit

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

LSI Fusion-MPT SAS Driver (Server 2003 32-bit)

6. The Windows

Setup loads the RAID card drivers from the RAID driver disk.

When next screen appears, press <Enter> to continue installation.

7. Setup then proceeds with the OS installation. Follow screen instructions to

continue.

Summary of Contents for LSISAS RAID Card PIKE 1064E

























































Search results

Summary of Contents for LSISAS RAID Card PIKE 1064E

Reviews:

Related manuals for LSISAS RAID Card PIKE 1064E

Brands by name

Popular brands

Asus LSISAS RAID Card PIKE 1064E, User Manual

Search results

Summary of Contents for LSISAS RAID Card PIKE 1064E

Reviews:

Related manuals for LSISAS RAID Card PIKE 1064E

Brands by name

Popular brands