2-16
Chapter 2: RAID configuration
Activating an array
If an array is removed from one controller/computer or moved to another, the array is
considered inactive. When you add the array back to the system, you may reactivate
the array.
To activate the array:
1. From the
Manage Array
screen, select
Activate Array
, then press <Enter>.
2. Press <Y> to activate, or <N> to cancel.
Deleting an array
• You cannot recover lost data if you delete an array. Make sure you back up
important data before deleting an array.
• If you delete an IM (RAID 1) volume, the data is preserved on the primary
disk.
To delete an array:
1. From the
Manage Array
screen, select
Delete Array
, then press <Enter>.
2. Press <Y> to delete, or <N> to cancel.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
LSI Corp Config Utility v6.20.00.00 (2007.12.04)
Manage Array -- SAS1064E
Identifier LSILOGICLogical Volume 3000
Type IME
Scan Order 0
Size(MB) 51498
Status Inactive
Manage Hot Spare
Synnchronize Array
Activate Array
Delete Array
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
LSI Corp Config Utility v6.20.00.00 (2007.12.04)
Manage Array -- SAS1064E
Identifier LSILOGICLogical Volume 3000
Type IM
Scan Order 0
Size(MB) 34332
Status Optimal
Manage Hot Spare
Synnchronize Array
Activate Array
Delete Array
