Asus K8S-MX User Manual Download Page 50 | Manualshive

Page: 50 / 84

background image

2-14

Chapter 2: BIOS Setup

2.4

Advanced menu

The Advanced menu items allow you to change the settings for the CPU and other
system devices.

Take caution when changing the settings of the Advanced menu items.
Incorrect field values may cause the system to malfunction.

JumperFree Configuration
CPU Configuration
Chipset
Onboard Devices Configuration
PCI PnP

2.4.1 JumperFree Configuration

Configure System Frequency

Overclock Option

[Standard]

Overclock Option [Standard]

Sets the mode for overclocking. Configuration options: [Manual] [Standard]

CPU Frequency [XXX] (value is auto-detected)

Indicates the frequency sent by the clock generator to the system bus and PCI
bus. The bus frequency (external frequency) multiplied by the bus multiple equals
the CPU speed. The value of this item is auto-detected by BIOS. The values range
from 200 to 250. Use the <+> and <-> keys to adjust the value.

AGP/PCI Frequency (MHz) [Auto]

Allows you to set the AGP/PCI frequency.
Configuration options: [Auto] [66/33] [75/37] [80/40]

The following items appear only when the Overclock Option is set to Manual.

«
...
48
49
50
51
52
...
»

Summary of Contents for K8S-MX





















































































Reviews:

No comments

Related manuals for K8S-MX

Brand: JETWAY Pages: 41

Brand: ST Pages: 24

970 Extreme3 R2.0

Brand: ASROCK Pages: 70

Brand: Texas Instruments Pages: 25

Brand: JETWAY Pages: 47

Brand: ASROCK Pages: 43

Brand: Aura Light Pages: 8

Brand: ASROCK Pages: 40

Brand: Gigabyte Pages: 72

Brand: Icop Pages: 30

Brand: ECS Pages: 87

Brand: Gigabyte Pages: 120

Brand: NXP Semiconductors Pages: 19

Brand: Quantum Design Pages: 59

Brand: Quantum Design Pages: 75

Brand: THine Pages: 13

GA-X99-Phoenix SLI

Brand: GIGA-BYTE TECHNOLOGY Pages: 128

Brand: SiTime Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands