Asus K8S-MX User Manual Download Page 13 | Manualshive

Page: 13 / 84

background image

ASUS K8S-MX motherboard

1-3

1.3

Special features

1.3.1 Product Highlights

Latest processor technology

The motherboard supports the AMD Athlon™ 64 and AMD Sempron™ desktop
processors. The AMD Athlon™ 64 is based on AMD’s 64-bit architecture, which
represents the landmark introduction of the industry’s first x86-64 technology. This
processor provides a dramatic leap forward in compatibility, performance,
investment protection, and reduced total cost of ownership and development.

The AMD Sempron™ is a 32-bit processor that provides the performance needs of
value-conscious buyers. This processor is designed to deliver best-in-class
performance for everyday computing.

HyperTransport™ Technology

HyperTransport™ Technology is a high-speed, low latency, point-to-point link
designed to increase the communication speed between integrated circuits in
computers, networking and telecommunicatons equipment up to 48 times faster
than other existing technologies.

Cool ‘n’ Quiet!™ Technology

The motherboard supports the AMD

®

Cool ‘n’ Quiet!™ Technology that dynamically

and automatically changes the CPU speed, voltage and amount of power
depending on the task the CPU performs.

Serial ATA solution

The motherboard supports two interfaces compliant to the Serial ATA (SATA)
specification, an evolutionary replacement of the Parallel ATA storage interface.
The Serial ATA specification allows for thinner, more flexible cables with lower pin
count, reduced voltage requirement, up to 150 MB/s data transfer rate.

Serial ATA RAID solution

The motherboard provides a high-performance Serial ATA RAID controller that
enhance hard disk performance and data backup protection without the cost of
additional RAID cards. The onboard SIS 965L RAID controller provides two Serial
ATA connectors for RAID 0 and RAID 1 functions.

AGP 8X support

AGP 8X (AGP 3.0) is the VGA interface specification that enables enhanced
graphics performance with maximum bandwidth speeds of up to 2.12 GB/s.

«
...
11
12
13
14
15
...
»

Summary of Contents for K8S-MX





















































































Reviews:

No comments

Related manuals for K8S-MX

Brand: Atmel Pages: 23

Brand: ASROCK Pages: 2

Brand: Ublox Pages: 38

Brand: Avalue Technology Pages: 79

Brand: Pericom Pages: 8

Brand: SOLTEK Pages: 94

Brand: DFI Pages: 78

LanParty UT nF3 Ultra-D

Brand: DFI Pages: 115

Brand: DFI Pages: 114

BOXD945GCLL - Socket 775 MicroATX Motherboard

Brand: Intel Pages: 90

Brand: Bluetechnix Pages: 38

Super 7 SY-5EMA+

Brand: SOYO Pages: 16

WOLFDALE1333-DVI

Brand: ASROCK Pages: 124

Brand: Gigabyte Pages: 8

Brand: TYAN Pages: 42

Brand: TYAN Pages: 41

Brand: Foxconn Pages: 65

Brand: Intersil Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands