22
Internet Router User Guide
The most common format for the SPID is 10 digits (area
code + local number) for the phone number, followed by 4
digits for the device ID.
e.g. 555-555-1234-0101
Where 555-555-1234 is the phone num-
ber, and 0101 is the device ID.
However, there is wide variation in SPID formats, and you
must use the method advised by your phone company.
If your telephone company did not provide this informa-
tion, leave this blank.
SPID (2
nd
B Channel)
Enter the SPID for the 2
nd
B Channel. (See above)
LAN Settings
The TCP/IP settings displayed on the screen are read-only.
Once setup is complete:
•
Restart the ISDN Internet Router by disconnecting and reconnecting the
power.
•
Refer to the next document (LAN/PC Setup) for details on setting up each
PC, including the one used for configuration.
Other Setup
Except in the following circumstances, no other configuration is required.
Summary of Contents for ISDNLink INET-800
