background image

2-18

Chapter 2: Hardware information

2.7 

Connectors

2.7.1 

Rear panel connectors

1.  PS/2 mouse port (green).

 This port is for a PS/2 mouse.

2.  LAN 1 (RJ-45) port.

 This port allows Gigabit connection to a Local Area 

Network (LAN) through a network hub. Refer to the table below for the LAN 

port LED indications.

3.  RJ-45 port for iKVM.

 (Hummingbird model only) 

This RJ-45 port functions 

only when you install ASMB4 management card.

4.  PS/2 keyboard port (purple).

 This port is for a PS/2 keyboard.

5.  LAN 2 (RJ-45) port.

 This port allows Gigabit connection to a Local Area 

Network (LAN) through a network hub. Refer to the table below for the LAN 

port LED indications.

6.  USB 2.0 ports 1 and 2.

 These two 4-pin Universal Serial Bus (USB) ports 

are available for connecting USB 2.0 devices.

7.  Serial (COM1) port.

 This 9-pin communication port is for pointing devices or 

other serial devices.

8.  Video Graphics Adapter port.

 This port is for a VGA monitor or other VGA-

compatible devices.

LAN port LED indications

LAN port

SPEED 

LED

ACT/LINK 

LED

Activity/Link LED

Speed LED

Status

Description

Status

Description

OFF

No link

OFF

10 Mbps connection

GREEN

Linked

ORANGE

100 Mbps connection

BLINKING

Data activity

GREEN

1 Gbps connection

Summary of Contents for Hummingbird

















































































































Reviews: