5-22
Chapter 5: BIOS setup
Bootup.Num-Lock.[On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Wait For ‘F1’ If Error [Enabled]
When set to
Enabled
, the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
Hit ‘DEL’ Message Display [Enabled]
When set to
[Enabled]
, the system displays the message
Press.DEL.to.run.
Setup
during POST. Configuration options: [Disabled] [Enabled]
5.6.3.
Security
The
Security
menu items allow you to change the system security settings. Select
an item then press
<Enter>
to display the configuration options.
Change.Supervisor.Password
Select this item to set or change the supervisor password. The
Supervisor.
Password
item on top of the screen shows the default
Not.Installed
. After you set
a password, this item shows
Installed
.
To set a Supervisor Password:
1. Select the
Change.Supervisor.Password
item and press
<Enter>
.
2. On the password box, key in a password containing up to six letters, or
numbers, or both, then press
<Enter>
.
3. Confirm the password when prompted.
The message
Password.Installed
appears after you successfully set your
password.
To change the supervisor password, follow the same steps in setting a supervisor
password.
To clear the supervisor password, select the
Change.Supervisor.Password
then
press
<Enter>
twice. The message
Password.uninstalled
appears.
If you forget your BIOS password, you can clear it by erasing the CMOS Real
Time Clock (RTC) RAM. See section
4.3.Jumpers
for information on how to
erase the RTC RAM.
Summary of Contents for G1-P7P55E
Page 1: ...G1 P7P55E ASUS PC Desktop Barebone User s Manual ...
Page 10: ... ...
