Asus G1-P5G43, User Manual

Page: 66 / 78

5-12 Chapter 5: BIOS setup
The following item appears only when you installed an Intel
®
CPU that supports
the Enhanced Intel
®
SpeedStep
®
Technology (EIST).
Execute-Disable.Bit.Capability.[Enabled]
Allows you to enable or disable the No-Execution Page Protection Technology.
Setting this item to [Disabled] forces the XD feature flag to always return to zero
(0). Configuration options: [Disabled] [Enabled]
Intel(R).SpeedStep(TM).Tech.[Enabled]
Allows you to use the Enhanced Intel
®
SpeedStep
®
Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]
5.4.2. Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the submenu.
North Bridge Configuration
Memory.Remap.Feature.[Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-bit
operating system. Configuration options: [Disabled] [Enabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configuring the DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate.Graphic.Adapter.[PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PCG/IGD [PEG/PCI]
CPU.TM.function.[Enabled]
Enables or disables Intel
®
CPU Thermal Monitor (TM) function, a CPU overheating
protection function. When enabled, the CPU core frequency and voltage are
reduced when the CPU overheats. Configuration options: [Disabled] [Enabled]