Asus F1A75-V PRO User Manual Download Page 51

Page: 51 / 124

ASUS F1A75-V PRO

2-31

Chapter 2

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel

audio I/O module cable to this connector.

• We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard’s high-definition audio capability.

• If you want to connect a high-definition front panel audio module to this connector, set

the

Front Panel Select

item in the BIOS setup to

[HD Audio]

; if you want to connect

an AC'97 front panel audio module to this connector, set the item to

[AC 97]

. By default,

this connector is set to [HD]. Refer to

3.6.3 Onboard Devices Configuration

for details.

Summary of Contents for F1A75-V PRO





























































































































Search results

Summary of Contents for F1A75-V PRO

Reviews:

Related manuals for F1A75-V PRO

Brands by name

Popular brands

Asus F1A75-V PRO, User Manual

Search results

Summary of Contents for F1A75-V PRO

Reviews:

Related manuals for F1A75-V PRO

Brands by name

Popular brands