x
F1A75-V PRO specifications summary
APU
AMD® A-Series and E2-Series Accelerated Processors with AMD
Radeon™ HD 6000 Series Graphics, up to 4 CPU cores, FM1
Package
Supports AMD® Turbo Core 2.0 technology
Supports Microsoft® DirectX® 11
* Support for AMD® Turbo Core 2.0 technology depends on the
APU types.
Chipset
AMD
®
A75 FCH (Hudson-D3)
Memory
Dual-channel memory architecture
4 x 240-pin DIMM slots support maximum 64GB unbuffered non-
ECC DDR3 1866 / 1600 / 1333 /1066MHz memory modules
* When you install a total memory of 4GB or more, Windows
®
32-bit operating system may only recognize less than 3GB. We
recommend a maximum of 3GB system memory if you are using a
Windows
®
32-bit operating system.
** The 64GB maximum memory capacity can be supported with
16GB DIMMs or above. ASUS will update the Memory QVL
(Qualified Vendors List) once the DIMMs are available on the
market.
*** Refer to www.asus.com for the latest Memory QVL (Qualified
Vendors List).
Graphics
Integrated AMD Radeon™ HD 6000 Series Graphics in Llano APU
Multi-VGA output support: DisplayPort, HDMI, DVI-D, D-Sub port
- Supports DisplayPort with maximum resolution
2560x1600@60Hz
- Supports HDMI with maximum resolution 1920x1200@60GHz
- Supports single-link DVI with maximum resolution
1920x1200@60GHz
- Supports D-sub with maximum resolution 1920x1600@60GHz
- Supports Microsoft
®
DirectX 11
Supports AMD
®
Dual Graphics technology
* Refer to www.amd.com for the discrete GPUs that support the
Dual Graphics technology.
Expansion slots
2 x PCIe 2.0 x16 slots with ATI
®
CrossFireX™ support
(Single@x16 or dual@x16/x4 mode)
2 x PCIe 2.0 x1 slots
3 x PCI slots
* The PCIe x1_2 slot shares the bandwidth with the PCIe x16_2
slot. Due to the CrossFireX™ limitation, DO NOT use the PCIe
x1_2 slot when you install two CrossFireX™ graphics cards on
both the PCIe x16 slots to set up a CrossFireX™ configuration.
Storage / RAID
AMD
®
A75 FCH:
- 6 x Serial ATA 6.0Gb/s connectors (gray) support RAID 0,
RAID 1, RAID 10, and JBOD configurations
Asmedia
®
PCIe SATA 6Gb/s controller
- 1 x Serial ATA 6.0Gb/s connector (navy blue)
- 1 x eSerial ATA 6.0Gb/s at the back I/O
(continued on the next page)
Summary of Contents for F1A75-V PRO
