Asus F1A75-V PRO User Manual Download Page 27

Page: 27 / 124

ASUS F1A75-V PRO

2-7

Chapter 2

2.3.2

Installing the CPU heatsink and fan

To install the CPU heatsink and fan:

Place the heatsink on top of the installed CPU, ensuring that the heatsink fits properly

on the retention module base.

Your boxed CPU heatsink and fan assembly should come with installation instructions for

the CPU, heatsink, and the retention mechanism. If the instructions in this section do not

match the CPU documentation, follow the latter.

• The retention module base is already installed on the motherboard upon purchase.
• You do not have to remove the retention module base when installing the CPU or

installing other motherboard components.

• If you purchased a separate CPU heatsink and fan assembly, ensure that a Thermal

Interface Material is properly applied to the CPU heatsink or CPU before you install the

heatsink and fan assembly.

Retention module

base

CPU heatsink

CPU fan

Retention

bracket lock

Retention bracket

Summary of Contents for F1A75-V PRO





























































































































Search results

Summary of Contents for F1A75-V PRO

Reviews:

Related manuals for F1A75-V PRO

Brands by name

Popular brands

Asus F1A75-V PRO, User Manual

Search results

Summary of Contents for F1A75-V PRO

Reviews:

Related manuals for F1A75-V PRO

Brands by name

Popular brands