Asus ESC500 User Manual Download Page 54

Page: 54 / 140

Chapter 3: Motherboard information

3-12

3.5

Internal connectors

Intel

C216 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-2 [gray])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial

ATA 6.0 Gb/s signal cables.

•

These connectors are set to [AHCI Mode] by default. If you intend to create

a Serial ATA RAID set using these connectors, set the

SATA Mode

item in

the BIOS to [RAID Mode]. Refer to section

4.5.4 SATA Configuration for

details.

• Before creating a RAID set, refer to section

5.5 RAID configurations or

the manual bundled in the motherboard support DVD.

•

When using NCQ, set the

SATA Mode

in the BIOS to [AHCI Mode]. Refer

to section 4.5.4 SATA Configuration for details.

•

You must install Windows

XP Service Pack 3 or later versions before using

Serial ATA hard disk drives. The Serial ATA RAID feature is available only if

you are using Windows

XP SP3 or later versions.

Summary of Contents for ESC500













































































































































Search results

Summary of Contents for ESC500

Reviews:

Related manuals for ESC500

Brands by name

Popular brands

Asus ESC500, User Manual

Search results

Summary of Contents for ESC500

Reviews:

Related manuals for ESC500

Brands by name

Popular brands