2-15
ASUS ESC500 G2
5. With the HDD label side up,
carefully insert the drive into the
3.5-inch bay and push the drive
into the bay until its screw holes
align with the holes on the drive
bay.
6. Swing back the HDD cage.
7. Push in the bay locks to secure
the hard disk drive.
8. Connect a 7-pin SATA cable (from
the motherboard SATA port) and a
15-pin power plug (from the power
supply unit) to the back connectors
of the hard disk drive.
Use either the 15-pin SATA power connector OR the legacy 4-pin power
connector. DO NOT use both to prevent damage to components and to keep
the system from becoming unstable.
