Asus ESC4000 G4 User Manual Download Page 169

Page: 169 / 178

ASUS ESC4000 G4 Series

7-15

7.7

Intel

Rapid Storage Technology enterprise 5.0

installation

This section provides the instructions on how to install the Intel

Rapid Storage Technology

enterprise 5.0 on the system.
You need to manually install the Intel

Rapid Storage Technology enterprise 5.0 utility on a

Windows

operating system.

To install the Intel

Rapid Storage Technology enterprise 5.0 utility:

Restart the computer, and then log on with

Administrator

privileges.

Insert the motherboard/system support DVD into the optical drive, and navigate to the

Utilities

menu.

Click the

Intel

Rapid Storage Technology enterprise

to begin installation.

4. The

Intel

Rapid Storage Technology enterprise

window appears. Click

Next

to start

the installation.

Summary of Contents for ESC4000 G4



















































































































































































Search results

Summary of Contents for ESC4000 G4

Reviews:

Asus ESC4000 G4, User Manual, Page: 169 / 178

Search results

Summary of Contents for ESC4000 G4

Reviews: