Asus ESC4000 G4 User Manual Download Page 129

Page: 129 / 178

5-35

ASUS ESC4000 G4 Series

System Event Log

Allows you to change the SEL event log configuration.

Erase SEL [No]

Allows you to choose options for erasing SEL.

Configuration options: [No] [Yes, On next reset] [Yes, On every reset]

When SEL is Full [Do Nothing]

Allows you to choose options for reactions to a full SEL.

Configuration options: [Do Nothing] [Erase Immediately]

BMC network configuration

The sub-items in this configuration allow you to configure the BMC network parameters.

IPV4

DM_LAN1/ Shared LAN

Config Address source [Previous State]

This item allows you to configure LAN channel parameters statistically or dynamically (by

BIOS or BMC). Unspecified option will not modify any BMC network parameters during

BIOS phase.

Configuration options: [Previous State] [Static] [DynamicBmcDhcp]

[DynamicBmcNonDhcp]

IPV6

DM_LAN1/ Shared LAN

IPV6 Support [Enabled]

Allows you to enable or disable LAN1 IPV6 Support.

Configuration options: [Disabled] [Enabled]

View System Event Log

This item allows you to view the system event log records.

Summary of Contents for ESC4000 G4



















































































































































































Search results

Summary of Contents for ESC4000 G4

Reviews:

Brands by name

Popular brands

Asus ESC4000 G4, User Manual

Search results

Summary of Contents for ESC4000 G4

Reviews:

Brands by name

Popular brands