Asus ESC4000 FDR G2 User Manual Download Page 154

Page: 154 / 200

6-34

Chapter 6: RAID configuration

6.4

Intel

Rapid Storage Technology

enterprise Utility (Windows)

The Intel

Rapid Storage Technology enterprise utility allows you to create RAID 0,

RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives

that are connected to the Serial ATA connectors supported by the Southbridge.

You can click

Rescan

to re-scan any attached hard disks.

1. Turn on the system to windows desktop.

2. Click the

Intel

Rapid Storage Technology enterprise

icon to display the

main menu.

Your storage system is configured for data protection, increased performance and

optimal data storage capacity. You can further optimize your storage system by

creating additional volumes.

To enter the Intel

Rapid Storage Technology enterprise SCU option ROM utility

under Windows operating system:

Summary of Contents for ESC4000 FDR G2









































































































































































































Search results

Summary of Contents for ESC4000 FDR G2

Reviews:

Related manuals for ESC4000 FDR G2

Brands by name

Popular brands

Asus ESC4000 FDR G2, User Manual

Search results

Summary of Contents for ESC4000 FDR G2

Reviews:

Related manuals for ESC4000 FDR G2

Brands by name

Popular brands