Asus ESC4000 FDR G2 User Manual Download Page 144

Page: 144 / 200

6-24

Chapter 6: RAID configuration

6.3

Intel

Rapid Storage Technology

enterprise SCU/SATA Option ROM

Utility

The Intel

Rapid Storage Technology enterprise SCU / SATA Option ROM utility

allows you to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s)

from Serial ATA hard disk drives that are connected to the Serial ATA connectors

supported by the Southbridge.

You can create RAID mode by use of onboard AHCI SATA ports. Also, when

installed optional ASRK module, you can use onboard scu SAS ports to create

RAID mode.

To use onboard SATA ports:

1. Install all the Serial ATA hard disk drives.

2. Turning on the system. During POST, press,Del. to enter BIOS. Go to

Advanced Menu

PCH SATA Configuration

SATA Mode

, then press

<Enter>.

3. Set

SATA Mode

RAID Mode

and save, then reboot system.

4. During POST, press <Ctrl+I> to display the utility main menu.

To use SCU SATA ports:

1. Install all the SATA hard disk drives.

2. Turning on the system. During POST, press <Del> to enter BIOS. Go to

Advanced Menu

PCH SCU SAS Configuration

, then press <Enter>.

3. Confirm all the SAS hard disk drives you installed are correctly displayed,

then reboot system.

4. During POST, press <Ctrl+I> to display the utility main menu.

Summary of Contents for ESC4000 FDR G2









































































































































































































Search results

Summary of Contents for ESC4000 FDR G2

Reviews:

Related manuals for ESC4000 FDR G2

Brands by name

Popular brands

Asus ESC4000 FDR G2, User Manual

Search results

Summary of Contents for ESC4000 FDR G2

Reviews:

Related manuals for ESC4000 FDR G2

Brands by name

Popular brands