Asus ESC2000 User Manual Download Page 75

Page: 75 / 226

ASUS ESC2000 G2

3-27

15. VGA connector (VGA_HDR1)

This connector supports the VGA High Dynamic-Range interface.

16. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel

audio I/O module cable to this connector.

•

We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard’s high-definition audio capability.

•

If you want to connect a high-definition front panel audio module to this connector, set

the Front Panel Type item in the BIOS setup to [HD]; if you want to connect an AC'97

front panel audio module to this connector, set the item to [AC97]. By default, this

connector is set to [HD].

Summary of Contents for ESC2000



































































































































































































































Search results

Summary of Contents for ESC2000

Reviews:

Brands by name

Popular brands

Asus ESC2000, User Manual

Search results

Summary of Contents for ESC2000

Reviews:

Brands by name

Popular brands