Asus ESC2000 User Manual Download Page 194

Page: 194 / 226

6-20

Chapter 6: Driver installation

6.5

Intel

C600 Series Chipset SAS RAID (SATA

mode) Drivers installation

This section provides the instructions on how to install the

Intel

C600 Series Chipset SAS

RAID (SATA mode) Drivers

on the system.

You need to manually install the Intel

C600 Series Chipset SAS RAID (SATA mode) Drivers

on a Windows operating system.

To install the drivers:

Restart the computer, and then log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive. The support DVD

automatically displays the

Drivers

menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

Click the item

Intel

C600 Series Chipset SAS RAID (SATA mode) Drivers

from the

menu, and then follow the onscreen instructions to complete the installation.

Summary of Contents for ESC2000



































































































































































































































Search results

Summary of Contents for ESC2000

Reviews:

Brands by name

Popular brands

Asus ESC2000, User Manual

Search results

Summary of Contents for ESC2000

Reviews:

Brands by name

Popular brands