manualshive.com logo in svg

Asus ESC2000, User Manual

Share
Download
Asus ESC2000 User Manual Download Page 68

Chapter 3: Motherboard information

3-20

4. 

EATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1/EATX12V2)

These connectors are for an EATX power supply plugs. The power supply plugs are 

designed to fit these connectors in only one orientation. Find the proper orientation and 

push down firmly until the connectors completely fit.

• 

DO NOT forget to connect the 24+8+8-pin power plugs; otherwise, the system will not 

boot up.

• 

Use of a PSU with a higher power output is recommended when configuring a system 

with more power-consuming devices. The system may become unstable or may not 

boot up if the power is inadequate.

• 

This motherboard supports EATX2.0 PSU or later version.

• 

Ensure that your power supply unit (PSU) can provide at least the minimum power 

required by your system.

Summary of Contents for ESC2000



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands