Asus ESC2000 User Manual Download

Page: 189 / 226

ASUS ESC2000 G2

6-15

6.3

Intel

Network Connections Software

installation

This section provides the instructions on how to install the Intel

Network Connections

Software on the system.
You need to manually install the Intel

Network Connections Software on a Windows

operating system. To install the Intel

Network Connections Software:

Restart the computer, and then log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive. The support DVD

automatically displays the

Drivers

menu if Autorun is enabled in your computer.

•

Windows

automatically detects the LAN controllers and displays a New Hardware

Found window. Click

Cancel

to close this window.

•

If Autorun is NOT enabled in your computer, browse the contents of the support DVD

to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run the DVD.

Click the

Intel

Network Connections Software

to begin installation.

Click

Install Drivers and Software

option to begin installation.

Summary of Contents for ESC2000



































































































































































































































Search results

Summary of Contents for ESC2000

Reviews:

Related manuals for ESC2000

Brands by name

Popular brands

Asus ESC2000, User Manual

Search results

Summary of Contents for ESC2000

Reviews:

Related manuals for ESC2000

Brands by name

Popular brands